• The transformer is not included
• Dismantling price is included
• Prices loaded into a truck in Euro currency: 50000
• Seller can dismantle
• H rotor (vertical rotor)
• Rated Output: 300kW
• Make of gearbox: Without the gearbox
• Make of generator: Heidelberg Motors
• Generator: Dual Generator
• Quantity Available: 1
• Tower Height: 50 meters
• Tower Type: Guyed Mast/Pole
• Number Of Tower Sections: 2
• Rotor Diameter: 32 meters
• Year Of Built: 1991
• Year of the first operation: 1992
• Transformer Ratings HZ AND Voltage: 50 Hz / 400 V
WATCH THE VIDEO ADVERT
Sale price contains:
Complete Turbines – Towers, Nacelle, Hubs
Electronic devices are new in 2003 restoration incl. new paint in 2003
In 2007 all these machines have been prepared for re-installation. Rotor and Head (mechanism controlling wings) have been serviced by Bettink Ltd, a Dutch company specialist in Lagerway machines.
Blades fully refurbished in 2007
Copy of invoices available on request.
Gearboxes, generators all in working order. No mechanical damage. Ball-bearing should be verified by buyer for tear and wear.
Two units come without controller (These two units will be €1,500.00 EUR cheaper i.e. €19,500.00 per unit without controller unit
TECHNICAL SPECIFICATION
GENERAL
design according to NEN 6096
certified by CIWI (ECN) – Holland
cut in wind speed 3 m/sec.
nom. windspeed 12 m/sec.
cut out operating wind speed 25 m/sec.
max. survive windspeed 60 m/sec.
nominal power 80 kW
specific power 315 W/m2
calculated lifetime min. 20 years
ROTOR
number of blades 2
rotor position upwind
the angle of the main shaft 70 with the horizon
diameter 18 m
swept area 254 m2
speed variable 60 -120 rotations per minute
power regulation passive: blade-angle adjustment
active: fully variable mutator system
min. blade-angle 6,30
cone-angle 180 -1640
direction clockwise
location main bearing attached to the gearbox
BLADES
blade length 7,8 m
chord 500 – 625 mm
twist 50
material carbon fibre reinforced epoxy
mounted flexible
manufacturer A.T.V., Marseilles, France
GEARBOX
number of stages 2
ratio 1:20
nominal torque 8050 Nm
manufacturer Flender, Germany
GENERATOR
type asynchrony
nominal power 80 kW
number of poles 4
the nominal voltage of 400 volt
frequency variable: 40 – 80 Hz.
protection IP 55
manufacturer ABB or equal quality
GRID-CONNECTION
converter diode bridge – mutator
converter principle AC – DC – AC
power supply 400 V / 3 phase / 50 Hz.
TOWER
type cylindrical pipe
number of sections 3
hub height 31 m or 41 m
material hot-dip galvanised steel
location ascent external
YAW-SYSTEM
system active
signal based on the wind vane
driven by e-motor with the worm-wheel reduction
power yaw-motor 0,55 kW
yaw speed 1,20/sec.
yaw bearing crown-bearing; externally geared
yaw-break constant friction-break; 4 pcs.
CONTROLLER
control by Microprocessor
remote monitoring optional; typically via the public
Dismantle and Collect today for an ultra-cheap bargain!
Bergey’s slogan: “The wise choice for Performance, Reliability, and Ruggedness”
Apparently, the Bergey Excel 10 is ideal for homes, farms, and small businesses. Its extra-large rotor and low cut-in wind speed give it exceptional performance, out-producing all other wind turbines in its class. 30 years ago, Bergey pioneered the radically simple “three moving parts design” that has proven to provide the best reliability, service life, and value of all of the hundreds
of competitive designs that have come and gone in that time. A small wind turbine is a big investment and Bergey is clearly the wise choice.
BERGEY EXCEL 10 kW
TECHNICAL DATA & PERFORMANCE
START-UP WIND SPEED 5 mph (2.2 m/s)
CUT-IN WIND SPEED 5 mph (2.2 m/s)
RATED WIND SPEED 26 mph (11.6 m/s)
AWES RATED POWER (at 11 m/s or 25 mph) 8.9 kW
AWES ANNUAL ENERGY (at 5 m/s average) 13,600 kWh
CUT-OUT WIND SPEED none
FURLING WIND SPEED 36-40 mph (16-18 m/s)
MAXIMUM DESIGN WIND SPEED 134 mph (60m/s)
RATED POWER 10 kW ROTOR SPEED 0-400 RPM
MECHANICAL
TYPE 3-Blade Upwind, Horizontal-Axis
ROTOR DIAMETER 23 ft (7.0m)
WEIGHT 1020 lbs (460 kgs)
GEARBOX none
BLADE PITCH CONTROL none
OVERSPEED PROTECTION AUTOFURL®
TEMPERATURE RANGE -40 to 140 deg. F (-40 to 60deg. C)
ELECTRICAL
OUTPUT FORM 240VAC, 1-Phase, 60Hz
GENERATOR Permanent Magnet Alternator
Price includes:
Wind Generator, PowerSync II Inverter/Controller, 80ft lattice steel tower
