Completely Refurbished Vestas V66
1.65MW RCC Generator
On behalf of one of our affiliates, on offer for sale:
One complete generator with an air cooler
Upgrade on rotor metal package fixation done on this unit – RCC unit is also available!
Manufacturer: Weier DASG 450W – 690V – 50Hz
Immediately available
Can ship anywhere in the world
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on
☎ +44 77 888 66 846
3 x complete NRG Met Mast System – 60m For Sale
Built in 2011 – Very good condition
NRG data loggers and iPacks are included.
Anemometers and Wind Vanes included.
ONLY $8,000 per unit (was $20,000 per unit new)
Location: USA, Idaho Falls, ID
NRG 60M XHD NOW SYSTEM
The most widely used NRG complete system package. 60-meter XHD Tilt-up—built strong for durability and extreme weather survival—the industry’s largest diameter tilt-up tubular tower.
Industry-standard sensors—proven accurate for wind energy measurement studies.
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on
☎ +44 77 888 66 846
Power Climber tower and blade access hoists/lifts, these all come with cables, wire-rope, and 2x PC-3 motors
Model: MW1000
They are combination blade and tower access platforms that were custom-built for Vestas V82 turbine units and built to Vestas specifications. I have 9 of these units available. These items are available at our Colorado location for $15,000 USD each
They can be shipped to any American or European port in standard transport containers and we can get you a quote for shipping, or you can arrange your own transport.
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on
☎ +44 77 888 66 846
LM 19.1 Blades – Immediately Available
LM 19.1 Blades
– nine single blades Blades for AN Bonus MK IV for sale
– immediately available for collection
– located in Bremen (Germany) in a port
– blades sold individually or as a set
– no documentation available
– blades in seaworthy transport frames (said to be stackable)
– sold against best offer as is where is with loading to be performed by port
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on
☎ +44 77 888 66 846
WIND TURBINE TOWERS FOR SALE
Dongkuk Wind Turbine Towers
It Fits 2.5MW Wind Turbines!
These Towers fit any other 1MW – 2.5MW turbines with custom made an adapter:
Tower Height: 76 m (250ft) – 4 sections
Including Foundation Rings & Bolts
20 x 76m (250ft) WIND TURBINE TOWERS
Only $80,000 US per unit
Built in 2008
In Top Condition
Never in use before
Fits many wind turbines when fitted with a custom made adapter
by Email CALL US NOW!
+44 77 888 66 846
IMPORTANT NOTES
Viewings are arranged only if a signed LOI has been received.
Time wasters and tire kickers will strictly not be accommodated!
Fully Refurbished
Vestas V66 Generator – 1.65 MW RCC
On behalf of one of our affiliates, on offer for sale:
Vestas V66 Generator
One complete generator with air cooler
Upgrade on rotor metal package fixation done on this unit – RCC unit is also available!
Manufacturer: Weier DASG 450W – 690V – 50Hz
Immediately available
Can ship anywhere in the world
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on
☎ +44 77 888 66 846
4 x VESTAS TOWERS for V27 FOR SALE
Can be used to fit smaller sized wind turbines
SOLD
Instantly increase your revenue – Upgrade your exsisting low height wind turbine and to raise hub height to 31m
4x Vestas V27
Tower Height: 30m – one sections
Tower can be cut into two or three sections at request for only €900.00 per tower extra
Foundation Rings also available at small extra cost
Dismantled – Can be collected after Ww20 – 2014
Sensitive offers below €8,900 EUR per tower considered
In Top Condition
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on
☎ +44 77 888 66 846
1 x Complete Wind Monitor System
NRG Symphony Data Logger For Sale!
Only £1,800 FOR COMPLETE SYSTEM!
NRG Symphony Data Logger
Internet Ready!
1.5 years old –
Still in operation (can be viewed operating)
On 30m NRG Mast
3 x NRG #40 Calibrated Anemometers currently operating @ 15m, 20m and 30m)
NRG #200P Wind Vane
Symphony GSM iPack
Built in PV Power Supply system incl. PV Panel
Temperature Sensor Pack
Data Logger Housing with 2 padlocks
Mounting booms and all associated cabling
This System produces ‘Bankable’ data in 10 seconds interval which can be sent to four separate email addresses in either daily – weekly or monthly intervals!
Date of system installation: 2nd February 2012 – Logger serial no. 309003469
Tower Manufacturer & Model: NRG Series 1 30m met mast
The detailed diameter of tower sections: Uniform 150 mm diameter tube from base to 30m
Guy set intervals: 9m, 18m, 27m
Instrument mounting boom dimensions:
NRG Anemometer Boom length: 1.5m Boom diameter: 14mm Vertical separation from Boom to cup centre: 230mm
NRG Wind vane Boom length: 1.5m Boom diameter: 14mm Vertical separation from Boom to vane: 185mm
Instrument Details – Anemometers
A1: 30m NRG #40 calibrated anemometer Serial No. 185309 extended at 270 degrees connected to channel no.1
A2: 30m NRG #40 calibrated anemometer Serial No. 185305 extended at 90 degrees connected to channel No.2
A3: 15m NRG #40 calibrated anemometer Serial No. 195236 extended at 90 degrees connected to channel No.3
Wind vane: 1 x NRG 200P wind vane installed at 28m, extended at 360 degrees, connected to channel no.7
DOWNLOAD TECHNICAL SPECIFICATION:
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on
☎ +44 77 888 66 846
Fully Refurbished Vestas V52
850kW VCS Rotor Blade
On behalf of one of our affiliates, on offer for sale:
One Rotor Blade
Complete refurbished blade with blade bearing.
Repair and inspection report available.
Vestas 25A, weight class 1900 kg
Tip weight 706,0 & 706,4 kg
Colour RAL 7035
Manufacturer: Vestas
Immediately available
Can ship anywhere in the world
Price on request
Have one to sell? Sell it yourself
Our current Sales List –click here!
by Email CALL NOW!
+44 77 888 66 846
IMPORTANT NOTES
Viewings arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
RITZ Capacitor Voltage Transformers
Four 4 x Brand New and Unused 4.5 megabar RITZ Capacitor Voltage Transformers are immediately available now!
Immaculate condition!
One capacitor can handle 25 x 2MW wind turbines – All four units suitable to handle 100 x 2MW wind turbines
The new price was £258,300 GBP per unit – Offers welcome!
Can ship anywhere in the world – HEAVILY REDUCED !!!!
ExWorks -As is – Where is
Four 4 x Brand New and Unused 4.5 megabar RITZ Capacitors Voltage Transformers are immediately available now!
DOWNLOAD TECHNICAL SPECIFICATION:
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on ☎ +44 77 888 66 846
2 x Complete LOGIC ENERGY LeSense
Live Wind Monitor 30 m Mast Systems
For Sale!
Internet Ready!
Only 2 years old
Still in operation (can be viewed as operating)
Operating on a 30m guyed mast
3 x NRG #40 Calibrated Anemometers currently operating @ 15m, 20m and 30m)
NRG #200P Wind Vane
LogicEnergy LeSense Data Logger including valid & active software license (yearly renewable @ approx. £70.00 p.a.)
Built-in PV Power Supply system incl. PV Panel
Temperature Sensor Pack
Data Logger Housing with 2 padlocks
Mounting booms and all associated cabling
Multi-site Performance Tracking & Comparison
Monitor solar, wind, hydro, biomass, and heat systems
Web Remote Access Live Information 24/7
Custom Alerts put you in control
Maximize income generation / Reduce running costs
Remote Fully Managed Web System
Public Displays
Real-time monitoring via Smartphone iPhone, Android, etc.
Date of system installation: Summer 2012
Tower Manufacturer & Model: 30 m met mast
A detailed diameter of tower sections: Uniform 150 mm diameter tube from base to 30 m
Guy set intervals: 9 m, 18 m, 27 m
Instrument mounting boom dimensions:
NRG Anemometer Boom length: 1.5m Boom diameter: 14mm Vertical separation from Boom to cup center: 230mm
NRG Wind vane Boom length: 1.5m Boom diameter: 14mm Vertical separation from Boom to vane: 185mm
Instrument Details – Anemometers
A1: 30m NRG #40 calibrated anemometer extended at 270 degrees connected to channel no.1
A2: 30m NRG #40 calibrated anemometer extended at 90 degrees connected to channel No.2
A3: 15m NRG #40 calibrated anemometer extended at 90 degrees connected to channel No.3
Wind vane: 1 x NRG 200P wind vane installed at 28m, extended at 360 degrees
DOWNLOAD TECHNICAL INFO:
See the LogicEnergy Website for more Info: Click here!
………or for LogicEnergy Frequently Asked Questions: Click here!
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on
☎ +44 77 888 66 846
Aero Star 5 meter rotor blades with over speed tips.
Hubs are also available. All in great shape. 28 sets available (3 blades per set).
Only $2,000 per set. Hubs $500 each.
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
Current Sales List – click here!
by Email
Call us today on
☎ +44 77 888 66 846