Preferable tubular steel towers but Lattice towers also considered. All conditions considered but service history should be available. For a number of our registered ‘ready to buy’ clients, we urgently require used Vestas V90 – 2MW in 50Hz or 60Hz. Can come with or without towers.
Best prices paid – Cash buyers waiting!
Offers must include the following information:
Year of the build for each machine
Already dismantled or still operating?
Asking price loaded onto the truck in US $
Is service history available?
Scanned sample of at least 2 turbine’s service logbook for the last 6 month
Manufacturers specifications – pdf document
Pictures evidence of turbines as they are now (jpg’s) – mandatory
For a number of our registered ‘ready to buy’ clients, we urgently require used Vestas V25 – 200kW and V27 – 250kW in either 50Hz or 60Hz configuration.
IMPORTANT NOTES
Time wasters and tire kickers will strictly not be accommodated!
Used Wind Turbines MADE IN GERMANY – HOLLAND & DENMARK For Sale
Immediately Available!
20 x NordTank NTK 65 – 50kW
2 x Enercon E16 – 55kW
2 x Lagerwey LW15/75
1 x Lagerwey LW 18/80
20 x NordTank NTK 65 – 50kW – MADE IN DENMARK De-rated to 50kW
Rated output: 50kW
Tower Height: 24.4m
Rotor Diameter: 16.5m
Year of build: 1989/90
Qty available: 20
Full manufacturers specifications, users guide and service manuals available.
Price: €18,750 p.u. – part refurbished – ‘ExWorks’ owner’s site
Discounts available from 10 units upwards
Note: These turbines have been fitted with a ‘change over kit’ in the gearbox to de-rate nominal output to max. 50kW!
Price includes: Complete turbines, nacelles, rotors, blades, towers, controllers, new sets of nuts & bolts for blades and tower, Owner’s Manual, Service Manual, Foundation blueprints & one set of OSHA approved safety equipment per turbine.
OPTIONAL
Full refurbishment – €19,225 EUR
Transportation to EU seaport approx. – €3,5000
Installation approx. €5,000 (excl. crane hire) plus travel & accommodation cost for a crew of three for 2 – 3 days.
1 x Lagerwey LW18/80 and 2 x LW15/75 – MADE IN HOLLAND
De-rated to 50kW or 60kW on request
Rated output: 50kW – 60kW – 75kW or 80kW
Tower Height: 24m – 30m – 36m or 39m
Rotor Diameter: 15m or 18m
Year of build: 1990/91
Qty available: 1 x LW18/80 and 2 x LW15/75
Full manufacturers specifications, users guide and service manuals available.
Prices:
LW 18/80 – 36m tower version – €25,000 EUR –1 unit left
LW 15/75 – 24m tower version – €23,000 EUR – 2 units left
Note: The 50kW de-rated version comes with a refurbished 50kW generator replacement. The de-rated 60kW version is part of the refurbishing & installation package.
PLUS
Standard refurbishment – €14,730 EUR or
Full refurbishment – €19,225 EUR (optional – includes new ball bearings for gearbox and generator)
OPTIONAL
Controller update to ‘Wago’ remote control system – €9,000 (Italian language version also available)
Transportation to Italy approx. – €5,000
Installation approx. €5,000 (excl. crane hire) plus travel & accommodation cost for crew of three for 2 – 3 days.
Turbines are already dismantled
Previously in operation in Germany (LW18/80) and Holland (LW15/75)
Service history available
LW18/80 is only sold in refurbished condition and installation by specialized Lagerwey Installer from Germany! – No sale in ‘as is’ condition for the LW18/80!
LW18 or LW75 can be delivered also with refurbished 50kW generator – Price upon request!
These sized Lagerwey’s are getting rare and very difficult to get hold off. Prices for these are prone to continue to go up.
For a number of our registered ‘ready to buy’ clients, we urgently require used Vestas V80 – in 50Hz or 60Hz.
Can come with or without towers.Preferable tubular steel towers but Lattice towers also considered. All conditions considered but service history should be available.
Best prices paid – Cash buyers waiting!
Offers must include the following information:
Year of build for each machine
Current location
Already dismantled or still operating?
Asking price loaded onto a truck in US $
Service history available?
A scanned sample of at least 2 turbine’s service logbook for the last 6 month
Manufacturers specifications – pdf document
Pictures evidence of turbines as they are now (jpg’s) – mandatory
Please see below list and contact add owner if you have any of these parts in good condition for sale.
Technical Specifications:
Rotor – Quantity: 2 (6 blades)
Rotor NM 750/44 IEC1 + long blade tip + damping in blade
a. Blades: 3
b. Swept area 1520 m2
c. Synchronic rotor speed 27/18 rpm
d. Tip speed 62.1 m/s
e. The inclination of the rotor axis 5°
f. Tip angle -1.7°
g. Wind orientation upwind
h. Complete rotor with extenders
Complete Turbine – Tower, Nacelle, Blades, Hub, Controller, foundation base/ring – dismantling and loading onto a truck
Technical drawings
WATCH THE VIDEO ADVERT FOR FUHRLAENDER FL250 – 250kW:
MWPS Global can assist in dismantling, worldwide shipping & transportation as well as full refurbishing and upgrade services at highly competitive prices.
MWPS Global works with highly skilled re-manufacturers, refurbishers, and machinists. This ensures the re-manufactured equipment is properly restored to the original manufacturers’ specifications and is refurbished according to our high standards. Refurbished wind turbines offered by MWPS Limited are completely disassembled and thoroughly inspected and cleaned. Our highly experienced wind turbine refurbishment affiliates evaluate the condition of the reconditioned wind turbine and replace all wear parts. The main moving components will be reconditioned to new or better than new standards. The controls, gearbox, hub, generator, hydraulic system are all thoroughly reconditioned and are either restored or replaced. All refurbished wind turbines come with a full technical report of the reconditioning work undertaken. The controls, gearbox, hub, generator, hydraulic system are all thoroughly reconditioned and are either restored or replaced. All refurbished wind turbines come with a full technical report of the reconditioning work undertaken.
Fuhrlander FL100 Summary:
Turbine type: Fuhrlander FL100
Nominal Output: 100kW – (50Hz)
Rotor diameter: 21m
Tower Height: 31m
Built in 1993/94
Configuration: 3 Blades Horizontal Axis
Monopole Steel
31m – 2sections
IMPORTANT NOTES
Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!
