WINDMATIC 15S – Turbines Refurbished

Completely Re-manufactured

Windmatic 15S – 65kW (60Hz)

Wind Turbines For Sale

-As is – Where is – Ex-works owner’s site Minnesota – USA

WindMatic 15S – 65kW (60Hz)

Rated output: 39.5kW Single Phase / 39.5kW 3 Phase / 65kW 3 Phase
Hub Height: 84′
Tower Height: 79′ – 3 sections
Rotor Diameter: 15 m
Year of build: 1982/84
Completely Re-manufactured

Tower options

100′ Lattice Tower
120′ Lattice Tower
140′ Lattice Tower
100′ Monopole Tower
115′ Monopole Tower

WINDMATIC 15S

Please ask for a quotation for the above tower heights.

Available in 65kW or 35kW
Price includes Tower and standard controller
Available in single-phase or three-phase
Available in 240 volts or 480 volt
Completely Re-manufactured above and beyond original specifications
These wind turbines come complete for 60Hz on-grid operation.
Requires conversion prior to connection to 50Hz grid!

DOWNLOAD TECHNICAL SPECIFICATION:

WindMatic 15s – Monopole version brochure.pdf

IMPORTANT NOTES

Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!

Current Sales List – click here!

by Email

Call us today on ☎ +44 77 888 66 846

ICONIC 3.9mW Vertical Axis Wind Turbine

An Exclusive Opportunity to Acquire an Iconic Vertical Axis Wind Turbine

TECHNICAL SPECIFICATIONS:

MAKE AND MODEL OFFERED: Darrieus large-diameter, direct-drive, ring generator rated at 3.9 MW
RATED OUTPUT: 3.9MW
ROTOR DIAMETER: 100m
TOWER HEIGHT IN METRES: 96 metres
MAKE OF GENERATOR: Ring Generator
QUANTITY AVAILABLE: One
YEARS OF OPERATION: 1987 to 1993

IMPORTANT NOTES

Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!

Current Sales List – click here!

by Email

Call us today on

☎ +44 77 888 66 846

PIONEER 25kW Wind Turbines for sale

Overstock 25kW wind turbines

West Wind – Pioneer 25kW Wind Turbines for sale

Brand new with a 5-year warranty

PIONEER 25kW Wind Turbines

Technical Specifications

Upwind Active Yaw System
Generator
Rated Power: 25Kw
Type: 3 phase, 60 Hz synchronous 240v or 480v AC
RPM: 1800 (3 phase)
Optional: 240v single phase
Optional: 50 Hz (voltage set per country standard)

Mono-pole Tower

Construction material; steel plate
Height 80 ft (standard), (Optional) 100ft, 120ft, 150ft
Hub height: 84 ft
White powder-coated
Nacelle access: exterior tower ladder with Cat Walk
Base Diameter: 54 inches
Control Panel located outside the bottom of the tower

Rotor

Orientation: Upwind
16 foot
3 blades, fixed pitch
33.5 ft diameter
RPM 100
Noiseless than 68 decibels at the tower
Blades Fiberglass
Weight – approx. 75 lbs each
Area swept: 75 Square meters

Component Weights

Nacelle, rotor, and blades 3,450 lbs
Tower (2 sections): 7,100

Operational

Cut in speed: 8 mph
Cut-off speed: None (stall-regulated blades)
Survival wind speed: 120 mph

Other

Touch screen control panel
User-configurable control parameters
Soft Start for generator
Ultra Sonic Wind Vane / Anemometer
Slip-ring
Fibreglass nacelle cover/nose cone

PIONEER 25kW Wind Turbines – Options

Internet Accessibility
Heated wind vane
Transmission heater
Noise-dampening foam installed
Single-phase converter
Safety Features
Induction generator anti-Islanding
Fail-safe hydraulic disk brake
The blade over speed centrifugal actuated tip brakes
Thermal protection on the generator
Thermal protection on yaw controls
Vibration sensor for fault shutdown
Voltage and Frequency protection

Area swept: 75 Square meters
Weight – approx. 75 lbs each
Blades Fiberglass
Noiseless than 68 decibels at the tower
RPM 100
33.5 ft diameter
3 blades, fixed pitch
16 foot
Orientation: Upwind

IMPORTANT NOTES

Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!

Current Sales List – click here!

by Email

Call us today on

☎ +44 77 888 66 846

Tacke TW600e CWM Wind Turbines Sale

Two used

Tacke TW600e CWM 600kW (60Hz)

Wind Turbines For Sale from the USA

Build in 1998 – available October 2012 – 197 ft – (60m) tower height – 150ft (46m) rotor diameter
Service history is available.

2 x Tacke TW600e CWM 600kW (60Hz) – (Made in Germany) – Terms – ‘ExWorks’ seller’s site

Towers come in 3 sections – easy and cheap to transport!

Transformers included in sales price – 60 Hz / 750 kV

Can be viewed still erected – Dismantling scheduled for October 2012 – Buyer must dismantle – Seller can assist in arranging to dismantle

Perfect for investors from the USA South America or any other country with a 60Hz grid

Tacke TW600e

Service History available
Total output produced to date only 12,500,000 kWh (unit 1) and 14,100,000 kWh (unit 2)

TECHNICAL SPECIFICATIONS:

Turbine type: Tacke TW600e CWM 600kW (60Hz)

Built: 1998
Nominal Output: 600 kW (60Hz)
Rotor diameter: 150 ft (46m)
Tower Height: 197 ft – (60m)
Number of turbines available: 2

The sale price contains:

Complete Turbine – Tower, Nacelle, Blades, Hub, Controller & Transformers

Transformers (60Hz – 750kvA)

Technical drawings for foundations including drawings for foundation rings and frames etc.

Excluding dismantling. The buyer must dismantle. The seller can assist in arranging to dismantle

NOTE: These turbines are configured for 60Hz operation

Perfect for investors from the USA, South America, or any other country with a 60Hz grid

IMPORTANT NOTES

Viewings are arranged only if a signed LOI (Letter of Intention) has been received.

Time wasters and tire kickers will strictly not be accommodated!

Current Sales List – click here!

by Email

Call us today on ☎ +44 77 888 66 846

VEM Wind Turbine Generator 2.5MW Sale

Final Reduction for Quick Sale!

SOLD!

Two unused units of 2.5MW VEM Three-Phase Synchronous generator (for wind turbines) are immediately available at a massively reduced price for sale.

New factory price: $300,000 USD (€212.000 EUR)
Buy now for only $47,000 (€35,000 EUR) per unit
Shipping Terms: ExWorks Owner’s Site

REFERENCES:

VEM Generators are installed and operating in the following Wind Turbines:

Fuhrlander
REpower 5M
Gamesa G80 – 2.0mW
GE 2.5xl
Nordex N100/2500
Vestas V80/90

This VEM Generator is from the inventory of a recently collapsed project and has never been in operation in any wind turbine before. It had been initially installed in a GE nacelle by GE but then taken out again after the project collapsed and the order was cancelled. These are ‘as new generators.

New factory price: $300,000 USD (€212.000 EUR)
Buy now for only $47,000 (€35,000 EUR)
Save over $240,000 USD (€172,000 EUR) of new factory price

Brand: VEM

Type: DRSYZ 5623-6USW
Output: 2.5 MW
Nennscheinleistung: 2 740 kVA / 2 400 kVA
Betriebsart: S 1
Nennspannung: 690 V
Nennstrom: 2 293 A / 2 008 A
Nennfrequenz: 82,5Hz 74,5 Hz
Nenndrehzahl: 1 650 min-1 1 490 min-1
Drehzahlbereich: 500 bis 1 850 min-1 / nmax = 1850 min-1
Drehrichtung: links
Bauform: IM B3
Schutzart Maschine: / Klemmen IP 54 / IP 54
Nennleistungsfaktor: cos 0,95 ü 1
Massenträgheitsmoment: 140 kgm2
Erregerwerte (Erregermaschine): 32 V / 3 A 28 V / 2,6 A
Wärmeklasse: F
Kühlart: Luft-Luft-Wärmetauscher
Stillstandsheizung: 750 W; 690 V AC, 50 Hz
Umgebungstemperatur (Betrieb): –30°C bis +50°C
Gesamtmasse: 7 500 kg
Brand: Bosch Rextroth
Type: GPV 510D
Output: 2500 kW
Rotor diameter up to: 90m

IMPORTANT NOTES

Viewings arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!

Current Sales List – click here!

by Email

Call us today on

+44 77 888 66 846

WIND EAGLE 300 Wind Turbine For Sale

Four 300kW Used Wind Turbines

Wind Eagle 300

WIND EAGLE Turbine

Year of build: 1997
Location: CA, USA
Ex-Demonstration units (for India market: 50Hz cycles)
Ship terms: ‘As Is – Where Is’ – ExWorks owner’s site
As with any second-hand equipment of this age – do not ask for a warranty – these are sold ‘As Is – Where Is

TECHNICAL SPECIFICATIONS:

Rotor:

Material: Fiberglass-reinforced epoxy
Diameter: 26.8 m
Swept Area: 564 m2

Braking System:

Aerodynamic: Full-blade stall controlled
Fail-safe: Centrifugal switch

Post Image WIND EAGLE 300 Wind Turbine For Sale — Nacelle

Gearbox:

Type: 2-stage planetary
Ratio: 1:29.5

Generator:

Type: Induction
Rated Power: 300kW
Voltage: 480V

Tower:

Type: Tubular, guyed, tilt-up
Hub Height: 50 m
Material: 65 KSI yield, galvanized steel

Yaw Drive:

Type: Passive free movement

Weight:

Rotor: 844 kg
Tower: 8,182 kg
Nacelle: 5,216 kg
TOTAL: 14,242 kg

Year of build: 1997 – Location: CA, USA – Ex-Demonstration units (for India market: 50Hz cycles) –

Ship terms: ‘As Is – Where Is’ – ExWorks owner’s site –

As with any second-hand wind turbine equipment of this age – do not ask for a warranty – these are sold ‘As Is – Where Is’.

DOWNLOAD WIND EAGLE 300 – DETAILED DESCRIPTION SHEET:

WE300 description.doc

DOWNLOAD WIND EAGLE 300 – BROCHURE

windeagle300.pdf brochure

IMPORTANT NOTES

Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!

Current Sales List – click here!

by Email

Call us today on

☎ +44 77 888 66 846

MICON M700 – Used Wind Turbine For Sale

Micon M700 – 250/60kW Wind Turbine

Absolute Mint Conditioned For Sale

SOLD!

Summary:

1 x Micon M700 – 250/60kW (50Hz) complete for immediate sale
Only 4,400,000kwH produced to date (was operating in very low wind regime)
Dismantling cost was €8,000 EUR incl. crane hire
The turbine can be collected immediately
Rated output: 250/60 kW (dual generator)
Quantity available: 1
Tower Height: 36m (2 piece tower – can be pushed into each other – cheap to transport)
Rotor Diameter: 29m – LM12 blades plus 2m extender
Year of build: 1996
Service History

Have one to sell?
- Sell it yourself
Our current Sales List
- Click here!

Post Image MICON M700 Used Wind Turbine For Sale — by Email

CALL US NOW!

+44 77 888 66 846

IMPORTANT NOTES

Viewings are arranged only if a signed LOI has been received.
Time wasters and tire kickers will strictly not be accommodated!

GAMESA Spare Parts – Models G4x – G5x – G8x

Brand New GAMESA SPARE PARTS

Directly out of Gamesa Spare Part Inventory –
Bearings – Connectors – Breakers – Oil Pumps – Resistors – Drivers – CPUs etc.
Large quantities of budget-priced spare parts for all current models – G4x – G5x – G8x
immediately available –
Can ship anywhere in the world

Model	Part Number & Description	Price	Stock Qty
G4X	7371001 LOWER GROUND CONTROL INGECON G47	€39,259.27	4
G4X	883528 HANSEN RCC for 1	€19,528.83	16
G8X	XB1 DM101-50792 TRANSCEIVER MODULE RS-232	€10,191.78	62
G4X	883574 REP. CT291.01 INTEG. TERMINAL I	€6,636.88	3
G5X	AK9708 Card Connectors GP015654 Vpin	€5,607.34	270
G8X	INGT CARD 51023. AK9820 Vpin TERMINALS	€5,270.73	198
G5X	CARD 50737 AK9810 (AK9310 AK9330 PF950	€5,066.68	230
G4X	CT 883510 273.01 I CONTROL UNIT	€4,641.36	52
G4X	Rep. 883582 600 RCC-Current Driver I	€4,458.72	22
G4X	TRO SET FIL 7372001 INDUCTANCES INGECON	€4,308.73	3
G8X	BH2114 GP012876 Sisteam-A CPU (ST)	€3,356.01	257
G8X	BH2111 GP012877 Sisteam-A CPU (VPIN)	€3,121.30	377
G4X	CIR 888754. SACE BREAK S6N630LSIG	€2,870.69	25
G4X	90799 CONTROL PANEL CT232	€2,807.67	4
G4X	Valmet gearbox oil pump 103985	€2,636.39	8
G4X	DISC BRAKE MOD 734101. GAMESA V47-660 I	€2,533.58	16
G8X	GP024273 FAN EXT. GEN LOHER (286892)	€2,108.83	7
G8X	CARD 8 50963 SA.BH2371	€1,759.73	503
G4X	CT218 883380	€1,700.11	7
G8X	50128 MOD COMS. SERIES III CO PROCESSOR WITH	€1,587.20	165
G4X	PROTECTION 705123 VRCC PART2 I	€1,550.91	21
G4X	Gearbox Oil Pump 103977 47 HANSEN	€1,541.39	93
G8X	PPCS branching GP011819 NPBU UNIT-42C	€1,514.75	252
G4X	50545 CONTACTOR 550A-1 NO + 1 NC AUX EH550-30	€1,427.08	259
G4X	HIDRAULlCO 109951 V47-660 GROUP	€1,313.66	12
G4X	Hellos RESISTANCE GP003083 690V 50-60Hz 1500W	€1,284.92	73
G4X	NS630 STR23 50638 BREAKER IS	€1,279.89	92
G4X	REVERSIBLE HEAD RIGHT GP005541 Body-G47 <p	€1,246.66	38
G8X	CARD 8 50080 EA.BH2351	€1,236.55	935
G5X	GP021426 50HzI 10KVA TRANSFORMER 690-400	€1,196.00	34
G4X	Thyristor 228 CT 883388 Driver I	€1,088.22	31
G4X	2122 CT 883346 Analog Temp Input	€1,043.47	5
G4X	883408 1118 CT DC PNP Inp. Rei 2.6 I	€1,026.63	8
G4X	IC DRIVER I CT303 90793	€888.09	11
G8X	CARD 2 50955 CAN OUTPUT AK9095	€859.69	412
G8X	G C A FAN GP021311 ABB DTC (REF.987878	€859.19	45
G4X	706740 UNION HEAD FOR CILlNDRO HIDRAqL	€792.64	23
G4X	107247 BEARING SKF 6234 M C4 – front Wei	€704.31	40
G8X	TABLE GP014594 NCBC CONTROL-61C	€649.84	375
G5X	50021 CONTACTOR 3P 300A	€631.85	125
G8X	MODULE 50956 DRIVERS	€629.61	1.067
G4X	3364 CT 883440 EXT.POW.SUPP.230V	€619.36	36
G8X	GP012969 TRANS. CURRENT HF6 2000-1A 30VA	€615.59	126
G8X	GP003082 RESISTANCE HEATING: HELIOS 690V.	€613.25	114
G8X	GP014604 VENT. Calent. CIRRUS 80 220-240VAC	€543.66	100
G4X	CT 883456-248 SERIAL ADAPTER RS422 I	€526.44	5
G4X	Teja 706050TS higher pitch skidder G47	€506.44	23
G8X	Lightning arrester GP012971 FLT-PLUS CTRL-	€493.89	156
G4X	FO 50617 CONVER AK9065	€488.38	125
G5X	ATD GP021460 BREAKER (G.E.) FD63 UI Ui 750V 63A	€484.25	21
G5X	ATD GP021416 BATTERY EVAPORATOR TUBE	€470.81	22
G4X	GP025452 G4X/G5X1 Anemo preceding Icefree NRG-3	€413.61	652
G4X	VANE 835783 COMPLETE I	€399.92	41
G8X	GP012980 PT-100 FOR BEARING (Art.60139644) ()	€345.20	148
G8X	GP011812 APOW-01C POWER SUPPLY	€342.65	206
G4X	Hyd Pump 109933. V42-V44-08-R W9A1-3-B-003	€316.23	30
G4X	50555 160A BREAKER III + MAR	€312.69	357
G4X	GP020890 LINK B M. METSO G47 (L. MULTI)	€303.84	32
G5X	ATD GP021447 HISSOCOM CONTROL BOARD	€282.64	67
G4X	131028 PRESSURE MULTIPLlCADORA G47 (Danfos	€273.05	248
G4X	STATIC LlMITADOR CORRIRENTE 50005 PROL	€230.13	264
G8X	HANDLE GP019007 FG002 (ABB 3AFE68324955)	€228.06	61
G4X	Loh gearbox pump coupling 50791 I	€199.98	208
G4X	753115 Output filter for slip rings	€195.11	42
G5X	95410 RCC 600kW IGBT EUPEC	€188.28	63
G8X	TABLE GP021624 RESIST CONTROL	€179.68	172
G8X	FILTER OUTPUT BOARD GP011831 AOFC-02	€178.25	106
G4X	TANK GROUP 50720 G47 HIDRAULlCO	€175.66	29
G8X	GP012973 TRANS. HF3B CURRENT 2.5 VA 150-1A	€159.69	147
G4X	85484 TEFLON BACK PLATE FOR AXIAL 0 =	€146.48	87
G8X	THICK FILM GP014589 HBID NRED-61 Rev.C	€139.03	330
G4X	703810 FORK ADJUSTING ARM In ::	€138.69	129
G4X	737561 WIRE SEAL W584 VRCC I	€115.56	65
G4X	PT100 114298 SENSOR, HANSEN BEARING	€103.83	79
G5X	PHASE BRUSH BOLT GP004957 IND.G.0026	€93.14	243
G5X	ATD GP021462 FUSE 50A 690Vac 14×51 PMF	€73.80	38
G4X	HANSEN GP032249 BOARD COVER 796×446	€73.38	43
G4X	RELAY BASE 50642	€69.27	94
G8X	THE EARTH BRUSH GP016282 INDAR 40×32	€67.14	726
G4X	GP021429 IA FILTER BLANKET RE G4	€54.55	410
G5X	PRESSURE SWITCH GP021453 ATD 10mb (11-01-027	€52.10	26
G4X	FLOW REGULATOR 50809 02-163241 FCV7-i	€40.08	152
G5X	K6 50001 6A INT.AUT.2P S202	€36.36	318
G4X	JUNCTION BOX 703251 A4 I	€34.80	107
G4X	RC 50684 FIL TRO LA9F980	€30.83	184
G5X	ATD GP021454 OMRON LIMIT 15A-250V (1-4-536	€27.44	40
G5X	ATD GP021417 FILTER DRIER (11-01-0260)	€15.33	35
G4X	INDIC.LUM 50563.	€15.02	305
G5X	HIGH PRESSURE ATD GP021419 R-407C	€12.90	49
G5X	LOW PRESSURE ATD GP021420 R-407C	€12.90	50
G5X	ATD GP021458 INT. TUE. (G.E.) 3P 230/400Vca	€10.23	31
G4X	156136 Circlip DIN 471 60×2 TURKEY	€8.30	628
G5X	ATD GP021459 INT. TUE. (G.E.) 1P 230/400Vca	€5.78	44
G4X	GALVANIZED WASHER 897299 D17XD46X5 C’lL	€4.78	143
G5X	ATD GP021463 FUSE 16A 690Vac 14×51	€2.74	168
G4X	107778 DISC SPRING	€1.13	36
G4X	HEXAGON HEAD BOLT P630744	€1.13	3

SPANISH

Model	Part Number & Description	Price	Stock Qty
G4X	7371001 GROUND CONTROL INFERIOR INGECON	€39,259.27	4
G4X	883528 RCC para HANSEN 1	€19,528.83	16
G8X	50792 MODULO DM101-XB1 TRANSCEIVER RS-232	€10,191.78	62
G4X	883574 REP. CT291.01 INTEG. TERMINAL I	€6,636.88	3
G5X	GP015654 Tarjeta AK9708 Conectores Vpin	€5,607.34	270
G8X	51023 TARJETA INGT. AK9820 Vpin TERMINALES	€5,270.73	198
G5X	50737 TARJETA AK9810 (AK9310 AK9330 PF950	€5,066.68	230
G4X	883510 CT 273.01 CONTROL UNIT I	€4,641.36	52
G4X	883582 Rep. RCC 600 Driver-Current I	€4,458.72	22
G4X	7372001 CONJUNTO INDUCTANCIAS FIL TRO	€4,308.73	3
G8X	GP012876 SISTEAM-A BH2114 CPU (ST)	€3,356.01	257
G8X	GP012877 SISTEAM-A BH2111 CPU (VPIN)	€3,121.30	377
G4X	888754 CIR. BREAK SACE S6N630LSIG	€2,870.69	25
G4X	90799 CONTROL PANEL CT232	€2,807.67	4
G4X	103985 Bomba aceite multiplicadora Valmet	€2,636.39	8
G4X	734101 DISCO DE FRENO MOD. GAMESA V47-660 I	€2,533.58	16
G8X	GP024273 VENTILADOR EXT. GEN LOHER (286892)	€2,108.83	7
G8X	50963 TARJETA 8 SA.BH2371	€1,759.73	503
G4X	883380 CT218 I	€1,700.11	7
G8X	50128 MOD COMS. SERIE CON PROCESADOR III CO	€1,587.20	165
G4X	705123 PROTECCION PARA VRCC PART2 I	€1,550.91	21
G4X	103977 Bomba Aceite Multiplicadora HANSEN 47	€1,541.39	93
G8X	GP011819 PPCS BRANCHING UNIT NPBU-42C	€1,514.75	252
G4X	50545 CONTACTOR 550A + 1 NA-1 NC AUX EH550-30	€1,427.08	259
G4X	109951 GRUPO HIDRAULlCO V47-660	€1,313.66	12
G4X	GP003083 RESISTENCIA HEllOS 690V 50-60Hz	€1,284.92	73
G4X	50638 INTERRUPTOR AUTOMATICO NS630 STR23	€1,279.89	92
G4X	GP005541 CABEZA REVERSIBLE DERECHA G47	€1,246.66	38
G8X	50080 TARJETA 8 EA.BH2351	€1,236.55	935
G5X	GP021426 AUTOTRANSFORMADOR 690-400 10KVA	€1,196.00	34
G4X	883388 CT 228 Thyristor Driver I	€1,088.22	31
G4X	883346 CT 2122 Analog Input Temp	€1,043.47	5
G4X	883408 CT 1118 DC PNP Inp. Rei 2.6 I	€1,026.63	8
G4X	90793 CT303 THYRISTOR DRIVER I	€888.09	11
G8X	50955 TARJETA 2 SALIDAS CAN AK9095	€859.69	412
G8X	GP021311 VENTILADOR C A G ABB DTC (REF.987878	€859.19	45
G4X	706740 CABEZA DE UNION PARA CILlNDRO	€792.64	23
G4X	107247 SKF BEARING 6234 M C4 – delantero Wei	€704.31	40
G8X	GP014594 TABLA CONTROL NCBC-61C	€649.84	375
G5X	50021 CONTACTOR 3P 300A	€631.85	125
G8X	50956 MODULO DRIVERS	€629.61	1.067
G4X	883440 CT 3364 EXT.POW.SUPP.230V	€619.36	36
G8X	GP012969 TRANS. DE CORRIENTE HF6 2000-1A 30VA	€615.59	126
G8X	GP003082 RESISTENCIA CALEFACTORA: HELIOS	€613.25	114
G8X	GP014604 VENT. CALENT. CIRRUS 80 220-240VAC	€543.66	100
G4X	883456 CT 248 SERIAL ADAPTER-RS422 I	€526.44	5
G4X	706050TS Teja superior arrastrador pitch G47	€506.44	23
G8X	GP012971 LIGHTNING ARRESTER FLT-PLUS CTRL-	€493.89	156
G4X	50617 CONVER FO AK9065	€488.38	125
G5X	ATD GP021460 DISYUNTOR (G.E.) FD63 UI 750V Ui 63A	€484.25	21
G5X	ATD GP021416 BATERIA EVAPORADORA DE TUBO	€470.81	22
G4X	G4X/G5X1 GP025452 Anemo NRG anterior al IceFree-3	€413.61	652
G4X	835783 VELETA COMPLETA I	€399.92	41
G8X	GP012980 PT-100 FOR BEARING (Art.60139644)	€345.20	148
G8X	GP011812 FUENTE ALIMENTACION APOW-01C	€342.65	206
G4X	109933 Bomba Hidr. V42-V44 W9A1-08-R-3-B-003	€316.23	30
G4X	50555 INTERRUPTOR AUTOMATICO III 160A + MAR	€312.69	357
G4X	GP020890 ACOPLAMIENTO B M. METSO G47	€303.84	32
G5X	ATD GP021447 PLACA DE CONTROL HISSOCOM	€282.64	67
G4X	131028 PRESOSTATO MULTIPLlCADORA G47	€273.05	248
G4X	50005 LlMITADOR ESTATICO DE CORRIRENTE	€230.13	264
G8X	GP019007 MANETA FG002 (ABB 3AFE68324955)	€228.06	61
G4X	50791 Acoplamiento bomba multiplicadora Loh I	€199.98	208
G4X	753115 Filtro de salida para anillos rozante	€195.11	42
G5X	95410 RCC 600KW IGBT EUPEC	€188.28	63
G8X	GP021624 TABLA CONTROL RESIST	€179.68	172
G8X	GP011831 OUTPUT FILTER BOARD AOFC-02	€178.25	106
G4X	50720 DEPOSITO DE GRUPO HIDRAULlCO G47	€175.66	29
G8X	GP012973 TRANS. DE CORRIENTE HF3B 150-1A 2,5VA	€159.69	147
G4X	85484 PLACA TRASERA AXIAL DE TEFLON PARA 0=	€146.48	87
G8X	GP014589 FILM GRUESO HBID NRED-61 REV.C	€139.03	330
G4X	703810 HORQUILLA DE AJUSTE PARA EL BRAZO De::	€138.69	129
G4X	737561 CABLE W584 SEAL VRCC I	€115.56	65
G4X	114298 PT100 SENSOR, HANSEN BEARING	€103.83	79
G5X	GP004957 BULON PORTAESCOBILLAS FASE IND	€93.14	243
G5X	ATD GP021462 PORTAFUSIBLES PMF 14X51 690Vca	€73.80	38
G4X	GP032249 JUNTA TAPA HANSEN 796×446	€73.38	43
G4X	50642 BASE RELE	€69.27	94
G8X	GP016282 ESCOBILLA TIERRA LO INDAR 40X32	€67.14	726
G4X	GP021429 FILTRO DE AI RE MANTA G4	€54.55	410
G5X	ATD GP021453 PRESOSTATO DE PRESION 10mb	€52.10	26
G4X	50809 02-163241 REGULADOR DE CAUDAL FCV7-i	€40.08	152
G5X	50001 INT.AUT.2P K6 6A S202	€36.36	318
G4X	703251 CAJA CONEXION A4 I	€34.80	107
G4X	50684 FIL TRO RC LA9F980	€30.83	184
G5X	ATD GP021454 FINAL CARRERA OMRON 15A-250V	€27.44	40
G5X	ATD GP021417 FILTRO DESHIDRATADOR (11-01-0260)	€15.33	35
G4X	50563 INDIC.LUM.	€15.02	305
G5X	ATD GP021419 PRESOSTATO DE ALTA R-407C	€12.90	49
G5X	ATD GP021420 PRESOSTATO DE BAJA R-407C	€12.90	50
G5X	ATD GP021458 INT. AUT. (G.E.) 3P E16 230/400Vca 30C	€10.23	31
G4X	156136 ANILLO DE SEGURIDAD DIN 471 60X2 PAVO	€8.30	628
G5X	ATD GP021459 INT. AUT. (G.E.) 1P E10 230/400Vca 30C	€5.78	44
G4X	897299 ARANDELA D17XD46X5 GALVANIZADO EN	€4.78	143
G5X	ATD GP021463 FUSIBLE 14X51 690Vca 16A	€2.74	168
G4X	107778 DISCO RESORTE	€1.13	36
G4X	P630744 HEXAGON HEAD BOLT ISO 8765	€1.13	3

IMPORTANT NOTES

Time wasters and tire kickers will strictly not be accommodated!

Current Sales List – click here!

by Email

Call us today on

+44 77 888 66 846

2KW Wind Turbine Wanted

2KW Residential Used Wind Turbine Wanted

We are looking for a good condition 2 Kw used Wind Turbine. Residential Second hand wind turbine must be in perfect working order. All offers considered. Our customer can collect anywhere in Germany. If spare parts for the used wind turbine are available, please list on reply together with detailed description and price.

IMPORTANT NOTES

Time wasters and tire kickers will strictly not be accommodated!

Current Sales List – click here!

by Email

Call us today on

☎ +44 77 888 66 846

DANWIN D27 – Wind Turbines For Sale

DANWIN D27 – 225kW Wind Turbines

Immediately Available!

This Danwin D27 – 225kW wind turbines are three-bladed horizontal axis wind turbine which has a proven track record and a reputation to be well engineered and know for their robust and durable reliability. The rotors a are fixed-pitch design (stall) using blades which are manufactured by one of the world’s leading blade manufacturers LM Glassfiber. The original designer and manufacturer, Danwin A/S, were originally located in Denmark. The Danwin product portfolio was taken over by Norwin A/S and founded in 1992. This D27 – 225 kW wind turbine which was originally developed by Mr Per Lading, has been continuously developed and improved which led to what is today the NORWIN 29-Stall-225 kW wind turbine.

Basic General Specifications:

Rated output: 225 kW
- Asynchronous generator, 4 poles induction, 400V, 50Hz.
Tower Height: 30m
- Tubular steel 2 sections
Rotor Diameter: 27m
- The rotor is comprised of three fixed-pitch LM Glassfiber blades with a rotor diameter of 27 meters and 573 m²
Year of build: 1996
- First commissioned in 1996
Gearbox: Flender
- 3-stage gears with a 1:40 ratio
Generator: Loher
- The safety system is activated by rotor over-speed, grid failure or vibration of the nacelle and emergency switch-off.
Blades: LM
- Three fixed-pitch LM Glassfiber blades.
Yaw System: Electric yawing system
- 2 yaw motor drives. Hydraulic braking system.
Sale includes Nacelle, Rotor, Blades, Tower, Controller, Cabling, and full Manufacturers Specifications and User Guides.

Detailed specifications and prices are available upon request. MWPS World with its worldwide affiliate partner network can assist you in dismantling, shipping, refurbishing, and installation to provide you with a turn-key solution at highly competitive prices. Contact us at the number below for tailor-made supply packages.

Download Technical Specification:

Danwin D27 225kW Technical Specification.pdf

Have one to sell? Sell it yourself
Our current Sales List – click here!

IMPORTANT NOTES

Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!

by Email

CALL NOW!

+44 77 888 66 846

SIVA 250/50kW – Wind Turbine – 2009

Siva 250/50 Wind Turbine

2009 Model – Immediately Available!

BUY NOW PRICE: Only €55,800 EUR (incl. dismantling)

This Wind Turbine is still in operation – Can be disconnected from the grid and dismantled within days of signed contract and deposit received

TECHNICAL SPECIFICATIONS:

Rated Output: 250/50Kw
Mita Teknik Controller
Rotor Diameter: 30m – LM 13.4 blades
Tower height: 50m lattice tower
Rotor orientation: Upwind
Number of blades: 3
Turbine Type: Stall
Built in 2009
ABB 2 speed generator

These 250/50kW Siva wind turbines are built on proven technology, ensuring reliability and availability. Reducing the risk of downtime is achieved through a durable design. This technology safeguards the stability of your investment.

With an average availability above 95%, this turbine reduces cost and business risk to an unparalleled level. Its design and performance ensure that you can produce energy from low to medium-to-high wind onshore and Island sites at the lowest possible cost.

The latest generation of the SIVA range of turbines incorporates an improved yaw system, quality components from the best among European suppliers. Lowering your operating costs by simplifying turbine serviceability.

The Siva 250 wind turbine is being deployed since the year 2008 and IEC 61400-11 Type certified by DNV, Denmark. In the year 2008 and IEC 61400-13 Load measurements, IEC 61400-12-1. Power curve Measurements carried out by the Center for Wind Energy Technology (CWET) Govt of India, an accredited laboratory is the most successful model among all Siva turbine ranges.

Sale Price includes: Complete Siva Turbine – Tower, Nacelle, Blades, Hub, Controller, dismantling and loading onto buyer’s truck

Have one to sell? Sell it yourself
Our current Sales List – click here!

IMPORTANT NOTES

Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!

by Email

CALL NOW!

+44 77 888 66 846

LAGERWEY LW30-250kW-Refurbished

Fully Refurbished

LAGERWEY LW30 / 250kW – 30m Rotor

Wind Turbine For Sale

Due to refused planning permission, this fully refurbished Lagerwey LW30 – 250kW – 50Hz – 400V wind turbine is for sale immediately available, ready to collect.

TECHNICAL SPECIFICATIONS:

Note: Tower not included in sale – Ask for more details! – Turbine is fully refurbished. Blades suffered minor cosmetic damage during transport.

Turbine type: Lagerwey LW30 – 250-30 – 2 blades
Nominal Output: 250kW – (50Hz)
Rotor diameter: 30m
Configuration: 2 Blades Horizontal Axis

Sale price includes:

Turbine, Nacelle, Blades, Hub, Rotor
Technical Documentation
Please note: Brand New Foundation Anchor Ring available upon request

Refurbishing Schedule Download

Lagerwey lw30_250-refurbishing-schedule.pdf

Have one to sell? Sell it yourself
Our current Sales List – click here!

IMPORTANT NOTES

Viewings are arranged only if a signed LOI (Letter of Intention) has been received.
Time wasters and tire kickers will strictly not be accommodated!

by Email

CALL NOW!

+44 77 888 66 846